Oil and Gas Lubrication System

Product Detail

Oil and gas lubrication, known as "gas-liquid two-phase fluid cooling and lubrication technology" in academia, is a new type of lubrication technology that offers unparalleled advantages over traditional single-phase fluid lubrication technology. It has successfully solved the problem which cannot be overcome by dry oil lubrication and oil mist lubrication, it meets the needs of the latest developments in mechanical industrial equipment, especially suitable for high temperature, heavy load, high speed, very low speed, and bad conditions for the cooling water and the invasion of the dirt. Because it can solve the difficult problem that the traditional single phase fluid lubrication technology can't solve, and has a very obvious effect, greatly extending the service life of the friction pair and improve the site environment, it is more and more widely used, especially in the metallurgical industry.

Constitution

Pneumatic oil-gas lubrication system is mainly composed of main station, two-stage oil and gas distributor, PLC electrical control device, middle connecting pipe and pipe accessories

application scenarios

Application of oil and gas lubrication in chain

Chain drive is a widely used method in mechanical transmission, but in most cases, we neglect the importance of chain lubrication, shorten the life of industrial chain, and increase the frequency of replacing the whole chain, thus increasing the maintenance cost. At present, most chains are attached to the chain surface by high viscosity lubricating oil or grease. Although you can lubricate the chain and chain gear surface, but almost can not penetrate into the chain pins, bushings and rollers.

In order to better protect the chain service, you need to choose a chain of oil and gas lubrication device better, use chain lubricating oil and gas, not only saves the maintenance cost, but also reduce the damage of the chain and the frequency of replacement, its brings the benefits than the traditional way of daub grease lubrication, so the chain lubrication device of oil and gas is undoubtedly the most economical solution.

The chain oil and gas lubrication device is a kind of consumable centralized oil and gas lubrication system, in the way of lubrication, the oil and gas mixture is used as a two-phase flow injection, and the fine lubricating oil (1.8mm~40.6mm) is provided to the chain for the injection of oil and gas mixture dispenser. Due to the small amount of lubricants and the special injection to the chain, the lubricating oil can penetrate into the chain pin, the shaft lining and the roller, is a kind of economical and reliable lubrication model. The given lubricant is also usually provided by the chain in the middle of the operation, and the time interval is controlled by the pneumatic pulse generator.

 


Application of oil and gas lubrication in sawing machine.

Sawing machine is widely used in industry, while the sawing machine often adopt the traditional emulsion of pouring to raw materials and saw blade, which have the effect of lubrication and cooling, but this kind of lubricant needs a set of complete and reliable filtering system, this will increase the cost of the sawing machine itself, after long time using of emulsion needs for processing, this also increases the cost.

Compared with the traditional sawing machine, the sawing oil and gas lubrication system has great advantages.

?Sawing machine itself does not require filtration equipment to filter lubricant, thus saving machine manufacturing costs.

?There is no need to increase the operating costs of reprocessing lubrication.

?Oil consumption is very low, energy conservation and environmental protection.

? The cutting process does not pollute the operating environment.

? The surface of the workpiece is dry without post treatment.

In order to better protect the sawing machine, you need to choose a sawing machine of oil and gas lubrication device better, use Oil and gas lubrication of sawing machine, not only saves the maintenance cost, but also reduce the damage of the saw blade and the frequency of replacement, the Oil and gas lubrication of sawing machine is undoubtedly the most economical solution.

The Oil and gas lubrication of sawing machine is a kind of consumable centralized oil and gas lubrication system, in the way of lubrication, the oil and gas mixture is used as a two-phase flow injection, and the fine lubricating oil (1.8mm~40.6mm) is provided to the chain for the injection of oil and gas mixture dispenser. Due to the small amount of lubricants and the special injection to the chain, the lubricating oil can penetrate into the chain pin, the shaft lining and the roller, is a kind of economical and reliable lubrication model. The given lubricant is also usually provided by the chain in the middle of the operation, and the time interval is controlled by the pneumatic pulse generator.