Oil Flow Transmitter

Product Detail

Overview
 The YXQ oil flow transmitter is used in the  thin oil lubrication system, through which it can visually observe the flow  status of oil flow and send out oil shortage or stop signal through its sending  device, so as to achieve long distance surveillance and control. The applicable medium is the  lubricating oil of the viscosity grade N22 ~ N46
 DN 10~50 is threaded  connection, DN80 is flanged join,  Nominal pressure is 0.4MPa.
 

Technical  parameters

Model	DN	Nominal pressure      MPa	threaded connection      d	L	D	H	h	B	D1	S	Weight      kg
YXQ-10	10	0.4	G3/8”	136	80	71	30	75	47.3	41	2.1
YXQ-15	15	0.4	G1/2”	136	80	71	30	75	47.3	41	2.1
YXQ-20	20	0.4	G3/4”	136	80	71	30	75	52	47	3.5
YXQ-25	25	0.4	G1”	160	100	96	35	85	60	52	3.8
YXQ-32	32	0.4	G1 1/4”	160	100	101	40	85	66	58	4.2
YXQ-40	40	0.4	G1 1/2”	190	110	101	45	90	76	66	4.5
YXQ-50	50	0.4	G2”	200	110	112	50	90	92	80	4.8
YXQ-80	80	0.4	??DN80	260	170	190	80	~140	Ø200	Ø200	~9.8

 









 Use  of attention


1. the direction of the oil flow  is the same as the direction of the oil flow transmitter.

2. The switch must be loaded and  then connected to the power supply so as to avoid damage to the switch.

3. If there are any special  requirements of output form and output current, it should be marked when ordered; if the type of  switch is not marked, the PNP type DC three line type is configured.