Dry Oil Injection Valve
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
-
The used lubricating grease should be filtered with uniform texture and used within the grade range of specified cone penetration and viscosity.
-
Three large pneumatic parts should be set in the air admission pipeline to ensure that the air is clean, dry and pressure-constant.
-
No air is allowed to enter the grease transmission piping so as not to influence mist spray.
? . Overview
It applies to the lubrication of large-sized open gears employed in the industries such as metallurgy, mining, cement, chemical engineering, papermaking (for example, ball mill, rotary kiln, excavator, blast furnace material distribution machine ) as well as steel wire rope and chains. It is featured by exceeding certain space and spraying lubricating grease onto the frictional surfaces on directed and quantitative basis.
? . Technical parameters
Model |
Nominal pressure (MPa) |
Ejection distance (mm) |
Spraying diameter (mm) |
Minimum grease quantity (ml) |
Minimum pressure (MPa) |
Air pressure (MPa) |
Air flow (ml/min) |
Weight (kg) |
PF-200 |
10 |
200 |
120 |
1.5 |
1.5 |
0.5 |
380 |
1 |
Use grease with cone penetration 265~385(25?,150g) 1/10mm (NLGI0#~1#) or lubricating oil with minimum viscosity grade N120.
? . Dimensions
? . Use instruction
- Iron Pipe Clamp 5 Pieces / (Min. Order)
- Plastic Tube Clip 5 Pieces / (Min. Order)
- Oil Flow Transmitter 5 Pieces / (Min. Order)
- Binocular Strainer for Thin Oil Station 5 Pieces / (Min. Order)
- Dry Oil Filter Filtrator 5 Pieces / (Min. Order)
- Motor-driven Lubricating Grease Pump 5 Pieces / (Min. Order)
- Oil and Gas Lubrication System 5 Pieces / (Min. Order)
- Thin Oil Station 5 Pieces / (Min. Order)
- Thin Dilute Oil Station 5 Pieces / (Min. Order)
- Thin Oil Lubrication Station 5 Pieces / (Min. Order)
- Dual Line Greasing System 5 Pieces / (Min. Order)
- Single Line Greasing System 5 Pieces / (Min. Order)