Motor-driven Lubricating Grease Pump
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
This series motor driven lubricating pump should be installed in the environment with appropriate temperature and less dust for the convenience of adjustment, inspection, repair & maintenance and grease supplementing.
It is suggested to allocate this series motor driven lubricating pump in the central part of the system as possible, shorten the piping length of the system and maintain the lowest pressure decrease, thus enabling the pump to produce the pressure to overcome lubricating point resistance.
The set pressure of pump pressure regulation valve can be adjusted arbitrarily within the range of 0~40Mpa. It is not allowed to exceed the PN (40Mpa) of pump in use.
The filtering screen of filter at the pump grease outlet should be washed regularly for the avoidance of plugging.
When pressure arrives about 50Mpa for certain fault, the safety piece will break. New safety piece should be fit on only after the fault is found out and removed.
Supplementing grease into grease conservator must be done by using DJB-H1.6 motor driven grease filling pump from the grease inlet of grease conservator.
The film type volume indicator in grease conservator is only suitable for lubricating grease. If lubricating oil is used, it must be replaced by floating ball type volume indicator.
Appropriate volume of 3# molybdenum dioxide lubricating grease should be filled from the hole of air discharge plug in first use of motor driven speed reduction machine and filled every four months in the future.
This series motor driven lubricating pump should be used in indoor environment. Protection measures must be taken if used outdoor or in a severe environment.
? . Overview
DPB-P series motor driven lubricating pump can be applied to the single line and dual line grease and oil concentrated lubrication system with high lubrication frequency, long piping and dense lubrication points as a delivery device of supplying lubricating grease. It can also be equipped with a mobile cart, rubber hose, oil gun and cable to constitute a mobile motor driven lubricating pump unit which is suitable for the single equipment with low lubrication frequency, a small number of lubrication points, a large volume of grease feeding, and meanwhile being inconvenient for concentrated lubrication, for the purpose of mobile grease lubrication.
This series lubricating pump is the motor driven high pressure piston type. Working pressure can be adjusted arbitrarily within the range of PN with double overload protection. Grease conservation barrel is equipped with grease level auto-alarming unit. If equipped with electric control cabinet, the lubricating pump may realize fully automated control of dual line concentrated lubricating system and monitor the system in real time.
? . Technical parameters
Model | Nominal pressure (MPa) | Rated flow (ml/min) | Volume of conservator (L) | Motor | Environment temperature (?) | Weight (kg) | |
Power (kW) | Voltage (V) | ||||||
DRB1-P120Z | 40 | 120 | 30 | 0.37 | 380 | 0~80 | 56 |
DRB2-P120Z | 0.75 | -20~80 | 64 | ||||
DRB3-P120Z | 60 | 0.37 | 0~80 | 60 | |||
DRB4-P120Z | 0.75 | -2-~80 | 68 | ||||
DRB5-P235Z | 235 | 30 | 1.5 | 0~80 | 70 | ||
DRB6-P235Z | 60 | 74 | |||||
DRB7-P235Z | 100 | 82 | |||||
DRB8-P365Z | 365 | 60 | 74 | ||||
DRB9-P365Z | 100 | 82 |
Use grease with minimum cone penetration 220(25?,150g) 1/10mm (NLGI0#~3#) or lubricating oil with minimum viscosity grade N68.
? . Descriptions of model
? . Schematic diagram
? . Dimensions
| Specifications | D | H | H1 | B | L | L1 | a |
Conservator | 30L | 310 | 760 | 1140 | 200 | - | 233 | 1045 |
60L | 400 | 810 | 1190 | 230 | - | 278 | 1095 | |
100L | 500 | 920 | 1200 | 280 | - | 328 | 1205 | |
Motor power | 0.37kw 80r/min |
|
|
|
| 500 |
|
|
0.75kw 80r/min |
|
|
|
| 563 |
|
| |
1.5kw 160r/min |
|
|
|
| 575 |
|
| |
1.5kw 250r/min |
|
|
|
| 575 |
|
|
? Use instruction
? . Ordering instruction
1. When ordering mobile motor driven lubricating pump unit, it is required to specify the length of piping and cable. If it is not specified, 10m of cable and 3 m of rubber piping will be supplied for any order.
2. This series motor driven lubricating pump is equipped with three types of standard electric control cabinet which can be selected and ordered based on different control requirements.
2.1 GDK01 electric control cabinet without monitoring
2.2 GDK02 electric control cabinet with monitoring
2.3 GDK03 fully automated control electric control cabinet with monitoring
3. This series motor driven lubricating pump is equipped with a short-time interval working system. Please specify in the contract if long-time continuous working is required.
- Iron Pipe Clamp 5 Pieces / (Min. Order)
- Plastic Tube Clip 5 Pieces / (Min. Order)
- Dry Oil Injection Valve 5 Pieces / (Min. Order)
- Oil Flow Transmitter 5 Pieces / (Min. Order)
- Binocular Strainer for Thin Oil Station 5 Pieces / (Min. Order)
- Dry Oil Filter Filtrator 5 Pieces / (Min. Order)
- Oil and Gas Lubrication System 5 Pieces / (Min. Order)
- Thin Oil Station 5 Pieces / (Min. Order)
- Thin Dilute Oil Station 5 Pieces / (Min. Order)
- Thin Oil Lubrication Station 5 Pieces / (Min. Order)
- Dual Line Greasing System 5 Pieces / (Min. Order)
- Single Line Greasing System 5 Pieces / (Min. Order)